Commit 56805e83 authored by Lorenz Meier's avatar Lorenz Meier
Browse files

First community review version of autostart

parent 7bf2edc3
......@@ -105,7 +105,7 @@ attitude_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
pwm -u 400 -m 0xff
multirotor_att_control start
......
#!nsh
#
# Flight startup script for PX4FMU+PX4IO
#
# disable USB and autostart
set USB no
set MODE custom
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.007
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.13
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 7.0
param set MC_POS_P 0.1
param set MC_RCLOSS_THR 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.5
param set MC_YAWPOS_P 1.0
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.2
param save /fs/microsd/params
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 2
#
# Check if PX4IO Firmware should be upgraded (from Andrew Tridgell)
#
if [ -f /fs/microsd/px4io2.bin ]
then
echo "PX4IO Firmware found. Checking Upgrade.."
if cmp /fs/microsd/px4io2.bin /fs/microsd/px4io2.cur
then
echo "No newer version, skipping upgrade."
else
echo "Loading /fs/microsd/px4io2.bin"
if px4io update /fs/microsd/px4io2.bin > /fs/microsd/px4io2.log
then
cp /fs/microsd/px4io2.bin /fs/microsd/px4io2.cur
echo "Flashed /fs/microsd/px4io2.bin OK" >> /fs/microsd/px4io2.log
else
echo "Failed flashing /fs/microsd/px4io2.bin" >> /fs/microsd/px4io2.log
echo "Failed to upgrade PX4IO2 firmware - check if PX4IO2 is in bootloader mode"
fi
fi
fi
#
# Start MAVLink (depends on orb)
#
mavlink start
usleep 5000
#
# Start PX4IO interface (depends on orb, commander)
#
px4io start
pwm -u 400 -m 0xff
#
# Allow PX4IO to recover from midair restarts.
# this is very unlikely, but quite safe and robust.
px4io recovery
#
# Disable px4io topic limiting
#
px4io limit 200
#
# This sets a PWM right after startup (regardless of safety button)
#
px4io idle 900 900 900 900
#
# The values are for spinning motors when armed using DJI ESCs
#
px4io min 1200 1200 1200 1200
#
# Upper limits could be higher, this is on the safe side
#
px4io max 1800 1800 1800 1800
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the commander (depends on orb, mavlink)
#
commander start
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude estimator (depends on orb)
#
attitude_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
multirotor_att_control start
#
# Start logging
#
sdlog2 start -r 20 -a -b 14
#
# Start system state
#
if blinkm start
then
blinkm systemstate
fi
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment