Commit 9f88cbdc authored by Anton Babushkin's avatar Anton Babushkin
Browse files

autostart scripts: default MPC parameters updated

parent 103bece7
......@@ -22,6 +22,24 @@ then
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
param set MPC_THR_MAX 1.0
param set MPC_THR_MIN 0.1
param set MPC_XY_P 1.0
param set MPC_XY_VEL_P 0.1
param set MPC_XY_VEL_I 0.02
param set MPC_XY_VEL_D 0.01
param set MPC_XY_VEL_MAX 5
param set MPC_XY_FF 0.5
param set MPC_Z_P 1.0
param set MPC_Z_VEL_P 0.1
param set MPC_Z_VEL_I 0.02
param set MPC_Z_VEL_D 0.0
param set MPC_Z_VEL_MAX 3
param set MPC_Z_FF 0.5
param set MPC_TILT_MAX 1.0
param set MPC_LAND_SPEED 1.0
param set MPC_LAND_TILT 0.3
fi
set VEHICLE_TYPE mc
......
......@@ -23,19 +23,23 @@ then
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
param set MPC_TILT_MAX 1.0
param set MPC_THR_MAX 1.0
param set MPC_THR_MIN 0.1
param set MPC_XY_P 1.0
param set MPC_XY_VEL_D 0.01
param set MPC_XY_VEL_P 0.1
param set MPC_XY_VEL_I 0.02
param set MPC_XY_VEL_D 0.01
param set MPC_XY_VEL_MAX 5
param set MPC_XY_VEL_P 0.1
param set MPC_XY_FF 0.5
param set MPC_Z_P 1.0
param set MPC_Z_VEL_D 0.0
param set MPC_Z_VEL_P 0.1
param set MPC_Z_VEL_I 0.02
param set MPC_Z_VEL_D 0.0
param set MPC_Z_VEL_MAX 3
param set MPC_Z_VEL_P 0.1
param set MPC_Z_FF 0.5
param set MPC_TILT_MAX 1.0
param set MPC_LAND_SPEED 1.0
param set MPC_LAND_TILT 0.3
param set BAT_V_SCALING 0.00989
param set BAT_C_SCALING 0.0124
......
......@@ -2,36 +2,9 @@
#
# Generic 10” Octo coaxial geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>, Anton Babushkin <anton.babushkin@me.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ROLL_P 7.0
param set MC_ROLLRATE_P 0.12
param set MC_ROLLRATE_I 0.0
param set MC_ROLLRATE_D 0.004
param set MC_PITCH_P 7.0
param set MC_PITCHRATE_P 0.12
param set MC_PITCHRATE_I 0.0
param set MC_PITCHRATE_D 0.004
param set MC_YAW_P 2.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
sh /etc/init.d/8001_octo_x
set VEHICLE_TYPE mc
set MIXER FMU_octo_cox
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900
......@@ -23,19 +23,23 @@ then
param set MC_YAWRATE_I 0.05
param set MC_YAWRATE_D 0.0
param set MPC_TILT_MAX 1.0
param set MPC_THR_MAX 1.0
param set MPC_THR_MIN 0.1
param set MPC_XY_P 1.0
param set MPC_XY_VEL_D 0.01
param set MPC_XY_VEL_P 0.1
param set MPC_XY_VEL_I 0.02
param set MPC_XY_VEL_D 0.01
param set MPC_XY_VEL_MAX 5
param set MPC_XY_VEL_P 0.1
param set MPC_XY_FF 0.5
param set MPC_Z_P 1.0
param set MPC_Z_VEL_D 0.0
param set MPC_Z_VEL_P 0.1
param set MPC_Z_VEL_I 0.02
param set MPC_Z_VEL_D 0.0
param set MPC_Z_VEL_MAX 3
param set MPC_Z_VEL_P 0.1
param set MPC_Z_FF 0.5
param set MPC_TILT_MAX 1.0
param set MPC_LAND_SPEED 1.0
param set MPC_LAND_TILT 0.3
fi
set VEHICLE_TYPE mc
......
......@@ -23,7 +23,23 @@ then
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
param set MPC_THR_MAX 1.0
param set MPC_THR_MIN 0.1
param set MPC_XY_P 1.0
param set MPC_XY_VEL_P 0.1
param set MPC_XY_VEL_I 0.02
param set MPC_XY_VEL_D 0.01
param set MPC_XY_VEL_MAX 5
param set MPC_XY_FF 0.5
param set MPC_Z_P 1.0
param set MPC_Z_VEL_P 0.1
param set MPC_Z_VEL_I 0.02
param set MPC_Z_VEL_D 0.0
param set MPC_Z_VEL_MAX 3
param set MPC_Z_FF 0.5
param set MPC_TILT_MAX 1.0
param set MPC_LAND_SPEED 1.0
param set MPC_LAND_TILT 0.3
fi
set VEHICLE_TYPE mc
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment