Commit d89c762a authored by Stephen Rees's avatar Stephen Rees
Browse files

Update rc file for F450

parent f7b40782
uorb start
simulator start -s
param load
param set MAV_TYPE 2
param set MC_PITCHRATE_P 0.3
param set MC_ROLLRATE_P 0.3
param set MC_YAW_P 2.0
param set MC_YAWRATE_P 0.35
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
dataman start
......@@ -22,15 +17,24 @@ param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set MPC_XY_P 0.15
param set MPC_XY_VEL_P 0.05
param set MPC_XY_VEL_D 0.005
param set MPC_XY_FF 0.1
param set SENS_BOARD_ROT 8
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set LNDMC_FFALL_THR 1.0
param set NAV_ACC_RAD 2.0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.25
param set MC_PITCHRATE_P 0.25
param set MC_PITCH_P 5
param set MC_ROLL_P 5
param set MPC_Z_VEL_P 0.8
param set MPC_Z_VEL_I 0.15
simulator start -s
rgbledsim start
tone_alarm start
gyrosim start
......@@ -44,18 +48,19 @@ sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
position_estimator_inav start
ekf2 start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 ../../../../ROMFS/px4fmu_common/mixers/quad_w.main.mix
mavlink start -u 14556 -r 2000000
mavlink start -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink start -u 14556 -r 4000000
mavlink start -u 14557 -r 4000000 -m onboard -o 14540 -t 127.0.0.1
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment